weak tension tension clamp IK-CK
This clamp is used at the end of the network and angles less than 90 ° or more than 180 °.
For these angles, other clamps cause cable fatigue at the angle.
For these angles, other clamps cause cable fatigue at the angle. For this purpose, a traction clamp is used along with a pigtail screw at the end base.
Special benefits
Special wedge design
The wedge is composed of two parts, i.e., male and female, sliding inside the body and made of fibrous polyamide.
Body alloy
The body is made of aluminum with a special alloy to increase tensile strength.
Tow wire alloy
It is resistant to UV radiation. The wire rope is made of galvanized steel which has a very high tensile strength. The wire rope is restrained with rivets to the clamp body.
Plastic protector
Also, the plastic guard is located in the center of the wire rope arch so that it can last longer at the connection of the wire rope to the pigtail screw hook and provide higher mechanical strength to the clamp.It is resistant to UV radiation.
Custom design
Tensile part (steel wire rope with galvanized plating or steel wire or steel wire with galvanized plating) can be provided depending on the customer's request.
Technical specifications
Dimensions
Request a free consultation
Our experts are ready to answer and advise you.
